Skip to content

How To Use Concrete Pier Blocks

Concrete pier blocks can be used for a variety of purposes, including as foundation piers, retaining wall blocks, and steps. In order to use concrete pier blocks, you must first place them in the desired location and then use a shovel or other tool to compact the soil around the block. You can then use a level to make sure the block is level before beginning construction.

How To Use Concrete Pier Blocks

Concrete pier blocks are a great way to support a deck, porch, or any other structure. They can be used in place of traditional concrete footings, and they are much easier to install. To use concrete pier blocks, first mark the location where you want to install them. Next, dig a hole that is the same size as the pier block. Place the pier block in the hole and fill it with concrete. Let the concrete dry completely before using the structure.

Concrete pier blocks can be used to support posts for fences, decks, and other structures. The blocks must be buried in the ground so that the top of the block is level with or below the surrounding soil. Beams can then be attached to the posts and the block to hold up the structure.

  • Add gravel to the bottom of the hole until it is halfway full
  • Dig a hole in the ground that is the same size as the concrete pier block
  • Place the concrete pier block in the hole and fill in the

-Concrete pier blocks can be used in a variety of ways, including as foundation support, deck supports, and retaining wall supports. -When using concrete pier blocks as a foundation support, it is important to make sure that the blocks are properly aligned and that the weight of the structure is evenly distributed. -When using concrete pier blocks as deck supports, it is important to make sure that there is enough space between the blocks and the decking to allow for proper drainage.


Frequently Asked Questions

How Do You Set Deck Blocks?

Deck blocks are an easy and efficient way to set a deck foundation. They are concrete blocks with a notch on one side to fit the bottom of a wooden post. The post is then set in the notch, and the deck blocks are stacked on top of each other around the post.

How Many Deck Piers Do I Need?

You need as many deck piers as the number of posts you will have on your deck.

Can I Use Concrete Pier Blocks Instead Of Footings?

Yes, you can use concrete pier blocks in place of footings. Pier blocks are a type of concrete masonry unit (CMU) and are made to be used as a foundation for walls or columns. They have a wide base that makes them ideal for supporting weight, and they come in different sizes so you can find the right one for your project.

How Far Apart Should Pier Blocks Be For A Deck?

The pier blocks should be spaced out the same distance as the joists on the deck.

How Many Deck Blocks Do I Need For A 12X12 Deck?

You would need 9 deck blocks for a 12×12 deck.

How Far Apart Should Deck Blocks Be Placed?

There is no set answer to this question as it depends on the specific project and what is being built. Generally, deck blocks should be placed about 16 inches apart, but this can vary depending on the size and weight of the blocks.

How Many Piers Are Needed For A Deck?

There are many factors to consider when deciding how many piers are needed for a deck, such as the size and weight of the deck, the size of the pier cap, the soil type, and the frost line. In general, however, more piers are needed for a heavier deck.

How Deep Should A Pier And Beam Foundation Be?

A pier and beam foundation should be dug down to a depth that is below the frost line in your area.

Can I Build A Shed On Deck Blocks?

Yes, you can build a shed on deck blocks.

How Many Deck Blocks Do I Need For A 10X10 Shed?

A 10X10 shed would require 10 deck blocks.

How Deep Should Piers Be?

The pier should be as deep as the foundation will allow.

How Many Blocks Do I Need Calculator?

There is no definitive answer to this question as it depends on the specific project requirements. However, a general rule of thumb is that you will need at least 10 blocks for every 1,000 square feet of coverage.

How Do You Calculate Pier Size?

The pier size is calculated by the weight of the object to be supported and the soil conditions.


To Summarize

Concrete pier blocks can be used to create a sturdy foundation for a variety of projects. They can be used to support posts for decks, sheds, and other outdoor structures, or to create a solid base for a concrete slab. When using pier blocks, it is important to make sure that the blocks are level and properly aligned before pouring concrete.

Leave a Reply

Your email address will not be published.