Skip to content

How To Drywall Touch Ductwork

How to drywall touch ductwork is a simple guide on how to complete this task. It is a two-part guide that will take you through the process of taping and mudding the seams of your drywall, and then finishing the touch-up work.

How To Drywall Touch Ductwork

There are a few key things that you need to do in order to drywall touch ductwork: 1. Cut a hole in the drywall that is the same size as the ductwork. 2. Cut out a piece of insulation that is the same size as the hole in the drywall. 3. Put insulation around the ductwork. 4. Tape and mud the drywall around the hole.

-Tape measure -Cordless drill -1/2″ drill bit -Paint stirrer -Paint tray -Ruler or a straight edge -Circular saw -Chalk line -Compass – level -Drywall knife

  • Tape and mud the cut drywall edges prime and paint the touchups
  • Remove the insulation and debris from the ductwork
  • Cut the drywall around the ductwork using a drywall saw

on ‘Drying and Curing’ -Drying time may be shortened by using a heat gun -The use of a primer may also help to reduce the drying time -Touch ductwork should be completely dry before being covered in joint compound


Frequently Asked Questions

How Do You Fill Gaps Around Ductwork?

One way to fill gaps around ductwork is by using expanding foam insulation. Another way is to use metal tape or caulk.

Can Romex Touch Ductwork?

Yes, Romex can touch ductwork as long as it is properly insulated.

How Do You Drywall Around Ductwork?

There are a few different ways to drywall around ductwork. You can either use a metal drywall track, which is a metal frame that you put your drywall into and then attach it to the ductwork; or you can use a drywall corner bead, which is a metal or plastic strip that goes around the corners of your drywall and helps protect them from damage.


To Review

Adding drywall to the touch ductwork is a great way to finish the project and improve the look of the room. It is important to make sure that all of the seams are taped and filled in order to prevent air leaks. Once the drywall is finished, it is important to paint or wallpaper the wall in order to complete the project.

Leave a Reply

Your email address will not be published.