Skip to content

How To Build An Addition On Piers

An addition on piers is a great way to increase the living space in your home without breaking the bank. This type of construction is relatively simple and can be completed in a relatively short amount of time. It is also a relatively inexpensive way to add square footage to your home.

How To Build An Addition On Piers

Building an addition on piers is a great way to avoid having to dig into the ground and pour a concrete foundation. It’s also a good way to avoid having to build a support system for the addition, as the piers will already provide that. The process of building an addition on piers is fairly simple: 1. Decide where you want to build the addition and mark out the boundaries. 2. Dig down into the ground until you hit solid soil.

– Hammers – Nail Gun – Square – Level – Chisel – Saw Horses – Tape Measure – Pencil – Hammer Drill – Concrete Mix – Wheelbarrow – Shovels – Broom

  • pier foundations are built by excavating down to a stable soil layer and then constructing concrete piers in the hole. 2. the piers are then connected together with horizontal beams, which will support the weight of the addition

– Foundation: The foundation of an addition on piers should be constructed of pressure-treated lumber and concrete. – Pier Height: The height of the piers should be based on the frost line for your area. – Pier Spacing: The piers should be spaced at least 6 feet apart. – Beam Size and Spacing: The size and spacing of the beams should be based on the weight of the addition. – Roof Loads: The roof loads must be


Frequently Asked Questions

Do I Need A Foundation For An Addition?

You may not need a foundation for an addition, but it is always best to consult with a professional before beginning any construction project.

How Deep Should A Footer Be For A Room Addition?

A footer should be at least 12 inches deep for a room addition.

How Do You Do A Foundation For An Addition?

The first step in doing a foundation for an addition is to excavate the site and set up the forms. The next step is to pour the concrete and let it cure. Once the concrete has cured, you can install the framing and insulation.


To Summarize

Building an addition on piers is a great way to avoid adding load to an existing structure. It is also a good way to build in areas that are prone to flooding. When building on piers, it is important to make sure that the piers are properly spaced and that the foundation is properly reinforced.

Leave a Reply

Your email address will not be published.